I painted over the Masonite with a really good primer and then I decoupaged tissue paper in vivid colors over it — indigo blue, sunny yellow, even some silver tissue paper. It looks luminous, freckled, almost like water. Above the shower stall, I did much brighter colors and I sealed it all with a water-based polyurethane." While Cy applied his decoupage directly to the wall, his "simple French" look would work just as well applied to foam core or poster board, framed or not, and then hung on a bathroom wall for a splash of color you could change out whenever you want. "Paint the walls, or if they're mostly tile, paint the ceiling!" says Cy. "If the color doesn't work, you can paint it something else." And should you need to sell the house later, and believe the accepted wisdom that only white walls are appropriate in "For Sale" bathrooms, you can spend an afternoon painting it back. Or for just a minimal change, paint a frame and hang it on the bathroom mirror with Velcro.
Vessel Faucets Styles. A vessel facet is typically taller than traditional sink faucets. These are usually in the waterfall or spout style. Some vessel sinks come with a faucet designed just for that style of sink. This eliminate the need to match a faucet to the sink design. Shower and Tub Faucets. It's best to match the tub/shower faucet with the sink faucet. Tub and shower knobs and controls should be mounted 33" measured from the floor. The controls should be accessible from outside and inside the tub/shower, so be sure you're choosing hardware that can fulfill this requirement. Showerhead Styles. If you prefer a special showerhead, such as a rain showerhead, then stick with the same finish so it will match the rest of the tub hardware. The showerhead should clear the tallest person's height, so be sure you measure before you buy and install it.
If the product isn't certified, then you put yourself and your family in danger. Be sure to check for this certification and guarantee that the faucet is lead-free. Look for NSF Seal of Certification. The National Sanitation Foundation (NSF) oversees the "certification of plumbing products and materials". It also "helps confirm that they meet applicable American or international standards for a particular use". The NSF states, "Faucets and plumbing products intended for contact with drinking water should be tested and certified to NSF/ANSI Standard 61: Drinking Water System Components." The American National Standard ensures that these products have a limited amount of impurities. Look for the certification mark on the product, such as "NSF 61" (drinking water components) or "NSF pw" (drinking water components and others).
Any content, trademark’s, or other material that might be found on the Dreamascream website that is not Dreamascream’s property remains the copyright of its respective owner/s. In no way does Dreamascream claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Dreamascream. All Rights Reserved.